ZHT0020 – Analog Acquisition Module
ZHT0020 is an industrial-grade standard analog acquisition product that can collect up to two analog signals (0-10V or 0-5V) on site and convert them to the 485 interface standard Modbus-RTU communication protocol for uploading. The 485 interface has a maximum communication distance of 1,000 meters and can be directly connected to on-site PLC, industrial control instruments, configuration screens or configuration software. The collection accuracy is 10-bit (1024) resolution or 12-bit (4096) resolution. It can be widely used in industrial sites, distribution cabinets and other places where analog signal collection is required.
More details…
Description
- DC10~30V wide voltage;
- Power consumption: 0.4W
- Dual watchdogs, stable operation without downtime for 24 hours;
- Support RS485 communication;
- Communication baud rate: 2400; 4800; 9600; (default 4800 for appearance)
- Communication protocol: Support Modbus RTU protocol;
- 01-FF device addresses can be set, 5-digit address dial switch can set 1-30 address codes;
- 2 analog inputs;
- Support standard Modbus RTU protocol;
Parameter | Description |
---|
Durability | 100,000 times |
Rated Voltage | DC10-30V |
Indicator Light | Status Indicator |
Temperature Range | Industrial grade, -40℃~60℃ |
Size | 50mm*96mm*31mm |
Default Communication Format | 4800, 1, 8, none |
Data Interface | RS485 |
Baud Rate | 2400; 4800; 9600; |
RS485 Communication Wiring
ZHT0020 contains 1 485 interface, multiple devices can be cascaded through the 485 bus. Each module can set the address, the address is from 1-FF. The longest communication distance of the 485 bus is 1200 meters, and the communication distance can be increased through the 485 relay according to the actual application environment.
Wiring Instructions
ZHT0020 analog input supports 2-wire, 3-wire and 4-wire wiring;