ZHC493C 4G RTU is a support 2 Road dry (wet) node detection, 1 Relay (COM, NO) output, 1 Analog quantity (current 4~20mA) detection, 1 channel RS485 pass through, 1 way RS232 transparent transmission. The latest network IO products are compatible with Modbus RTU/TCP protocol. With “remote control” as the core function, it is highly easy to use, and users can easily and quickly integrate it into their own systems. It supports remote and local control. 
| Network parameters | |||||||
|---|---|---|---|---|---|---|---|
| Frequency band | Electrical parameters | ||||||
| LTE-FDD | B1/B3/B5/B8 | Class 3 (23 dBm ±2 dB) for LTE-FDD bands | |||||
| LTE-TDD | B34/B38/B39/B40/B41 | Class 3 (23 dBm ±2 dB) for LTE-TDD bands | |||||
| GSM | 900/1800MHz | Class E2 (27 dBm ±3 dB) for EGSM900 8-PSK | |||||
| Class E2 (26 dBm ±3 dB) for DCS1800 8-PSK | |||||||
| Data | Class 4 (33 dBm ±2 dB) for EGSM900 | ||||||
| LTE-FDD | Max 10Mbps(DL)/Max 5Mbps(UL) | Class 1 (30 dBm ±2 dB) for DCS1800 | |||||
| LTE-TDD | Max 7.5Mbps(DL)/Max 1Mbps(UL) | ||||||
| EDGE | Max 236.8Kbps(DL)/Max 236.8Kbps(UL) | ||||||
| GPRS | Max 85.6Kbps(DL)/Max 85.6Kbps(UL) | ||||||
| Sensitivity | |||||||
| FDD B1 | -97.5 dBm | TDD B34 | -96.3 dBm | EGSM900 | -105 dBm | ||
| FDD B3 | -94.3 dBm | TDD B38 | -97 dBm | DCS1800 | -106 dBm | ||
| FDD B5 | -97 dBm | TDD B39 | -96.3 dBm | ||||
| FDD B8 | -96.5 dBm | TDD B40 | -97 dBm | ||||
| TDD B41 | -96 dBm | ||||||
| Serial port | |||||||
| Number of ports | RS485*1, RS232*1 | ||||||
| Standard | RS485: A, B RS232: Tx, RX, G | ||||||
| Baud rate | 600 ~ 921600bps | ||||||
| Data bit | 8, 9 | ||||||
| Stop bit | 0.5, 1, 1.5, 2 | ||||||
| Check Digit | NONE EVEN ODD | ||||||
| DO | AI | ||||||
| Number of interfaces | 1Relay output | Number of interfaces | 1Analog input | ||||
| standard | NO*1, COM*1 | standard | AI*1, G*1 | ||||
| Mechanical durability | 10^7 | scope of test | 4~20mA | ||||
| Electrical durability | 10^5 | ||||||
| capacity | 5A 250VAC 30VDC | ||||||
| DI | |||||||
| Number of interfaces | 2Switch input | ||||||
| standard | DI*2, COM*1 | ||||||
| Detection range (wet node) | 5~50V->High0~2V->Low | ||||||
| Power Supply | EMC | ||||||
| Voltage | 9~36V | ESD | IEC61000-4-2, Level 4 | ||||
| Current | 60mA(aver) @9V | surge | IEC61000-4-2, Level 3 | ||||
| 30mA(aver) @36V | Group pulse | IEC61000-4-2, Level 3 | |||||
